Control Every Movement.Preserve Your Material.

Veritas Helix Slicer

Shapes in, G-code out

You set the shape with numbers instead of modelling it. Helix sweeps the profile, previews it, and emits the toolpath.

• The profile is three numbers

  Circumradius, lobe radius, edge sweep. Nothing to model, nothing to export.

• The sweep is three more

  Height, twist and bulge. Oscillate in Z ripples the wall at your wavelength.

• Every field says what it means

  Set edge sweep to 60° and it tells you that is tangent-continuous. You are never guessing what a number will do.

• Generate, then send

  G-code to disk, or straight to the printer.

Profile

R 40.0 / 15.0 mm

165 mm at the widest

Edge sweep

60.0°

Tangent-continuous

Sweep

100 mm, twist 30°

Bulge 0.500

Ripple

8.0 × 0.60 mm

38.5 bumps per loop

VP-DR01 — rev C

Dry, and you can prove it

Holds a temperature and reports the humidity in the chamber, so you know when a spool is dry instead of guessing at four hours.

Temperature

35–70 °C

Timer

1–24 hours

Noise

Under 28 dB

Materials

PLA, PETG, ABS, PA, TPU

Envelope

240 × 280 mm

Also on the bench

• Multi Filament Manager — Feeds and tracks several spools on any printer, not just one brand's.
• Hygrometers — Reads a chamber or dry box accurately enough to act on.